My Mods

Sigelei 150W TC

sigelei_150w_tcThe Sigelei 150W TC Mod is my first box mod and my introduction into the heavier vaping community.  This box takes 2 18650 batteries and I find that it lasts about a day on one set of batteries.

Max Power 150W Temperature Control Mode / wattage Mode Low Voltage Protection Low Resistance Protection Input High Voltage Warning (HHHHHHHH) Output Short-Circuit Protection Reverse Battery Protection Overheating Prevention(TOO HOT), to ensure temperature of electronic components on the PCBA does not get too high.

Variable Wattage Range: 10.0W – 150W

Joule Range: 10J – 100J

Output Voltage Range: 1.0V – 7.5V

Input Voltage Range: 6.4V – 8.4V

Temperature Adjustment Range: 100-300°C / 212-572°F

Atomizer Ohm Range: 0.1 ohm – 3.0 ohm

Battery: 2* 18650 High-Drain Batteries

Max Current: 35A

Dimensions: 103 x 57 x 25mm

Product Weight: 210g

Total weight:340g

Wismex Reuleaux RX200

Rx200_012The Wismex Reuleaux RX200 is my second box mod.  It has the RX200 chip and can handle not only going up to 200W but also can handle 3 different kinds of temp control coils. It can handle nickle, titanium, or stainless steel. It has 3 18650 batteries and I find that it lasts me around a day and a half of vaping.

Why need 3 cells for 200W? The RX200 with 3 battery cells can maintain the 200W high power output continuously and steadily.

Distinctive Exterior Structure: The unique hexagonal appearance makes the RX200 stand out from others. The structure of 3 replaceable battery cells and magnetic back cover make it look fashionable in your hand.

Fashionable Colors for Your Preference: The mixing white and classic black colors provide you two choices and make the device never out of style.

200W Max Output with Temperature Control function: Being powerful with the maximum output of 200W, the optional TC-Ni, TC-Ti, TC-SS and VW mode will provide you with different vaping experiences.

Onboard Reverse Polarity Protection: Reverse polarity protection can be successfully achieved by the application of special battery anti reverse circuit adopted in the circuit board.

Upgradeable firmware: You can upgrade your firmware through the micro USB port. Moreover, the upgradeable firmware will make you keep up with the vaping evolution.

Charging: It is better to take out the lithium-batteries from the device and then charge the cells. Moreover, it can also be charged via USB cable.

Size: 50.0mm*40.0mm*84.0mm

Thread type: 510 thread

Cell type: Three 18650 cells(discharging current should be above 25A )

Output mode: TC-Ni/TC-Ti/TC-SS/VW mode

Output wattage: 1-200w

Temperature range: 100-300°C/200-600°F(TC mode)

Resistance range: 0.05-1.0ohm for TC-Ni/TC-Ti/TC-SS mode 0.1-3.5ohm for VW mode 0.69 inch OLED screen

Noisy Cricket Mod

Noisy Cricket Mod, another innovative design by Jay-Bo, is much fashionable in appearance. It looks more classic because of the aluminum alloy body and surface brushed treatment. In addition to the connection in series and high power output, the unique linkage set and ventilation holes design make it even more adaptable and popular.

Changeable Cells Structure: With changeable 18650 cells, it will be much safer and more convenient for users. Its power output depends on the battery level and coil resistance.

SMPL Style Button: The fire button is located in the top of the device, which makes the contact efficiency greatly improved. The insulation ring at the bottom of fire button is used for protection circuit.

Special Linkage Set: The linkage at the baseboard, along with the hybrid adaptor, works well with 510 connectors of different lengths, which greatly increases the suitability of the device.

Bottom Ventilation Holes: The 6 ventilation holes at the bottom of mod body greatly help the device for better heat dissipation.

Cell type: Two 18650 cells

Thread type: 510 thread

Recommended resistance range: 0.25ohm-0.5ohm